This is a wet carbon dioxide compressor for one of the most important industrial gas producers worldwide, which required the pumping of 2.160 kg/h of wet CO₂ to help achieving a high purification of the gas. The project consisted on the delivery of a 3EHA-6- TER-GT package (3 stages and 6, non-lube, double acting cylinders), coupled to a 250kW motor controlled by a frequency converter. All accessories in contact with gas (dampers, separators, coolers and pipes) were made out of stainless steel. The main challenges were the high flexibility to adapt to customer´s specifications and the tough delivery time (5 months since PO to site).