This site uses cookies to enhance navigation. If you continue with your visit, you accept the use of cookies and privacy policy. Accept


Next event


23 September


See calendar

Compressors range

ABC COMPRESSORS are designed to work 24 hours a day, 365 days a year. Configured with up to 3 pairs of cylinders and 6 stages of compression, they minimize temperatures and loads providing an exceptionally long service life.

Additionally, the horizontally-opposed arrangement of the cylinders balances the inertia forces of the compressor, eliminating vibration to surrounding equipment, and wear and tear on the machine.

H Serie ABC-X Serie 
H Series
Download catalogue

The H Series caters to the most demanding working conditions in different applications, from engine and gas turbine cogeneration supply to high pressure compressed air production for PET blowing, including sectors such as petrochemical, waste treatment or industrial gas.


These are reciprocating compressors of horizontal type with opposed cylinders, simple or double-acting, of the crosshead type. Each line is driven by two crank sets at 180ºC to each other. The type of compressor is perfectly balanced because:

  • The two pistons of each line move in opposite directions.
  • Primary and secondary forces cancel out. Therefore there is no possibility of vibration or beating on the ground works.
  • The resultant stresses supported by each crankpin journal are equal and opposing, and they produce an axial torque without any reaction on the sump bearings.

Each compression stage is water cooled both in cylinders and heads, as well as in coolers.; which with counter current cooling water provide air or gas outlet temperatures of 10ºC above the water inlet temperature.

Power drive is transmitted through an inertia flywheel designed for achieving a minimum irregularity.

Lubrication of the mechanical parts is provided through a gear pump driven by the crankshaft. Some compressor models can have an auxiliary lubricating pump.

ABC-X Series
Download catalogue

The ABC and X series offer air compression solutions for a variety of sectors, such as the aggregate transport, naval and the industry in general.

These compressors use single-acting pistons, have up to 4 cylinders, with or without lubrication, work at powers between 1-100 CV, and compress air up to 15 bars (30 bars for marine engines).